Pump stundart size | Delivery
m3/h |
Head
m |
Rolational speed
с-1 (rot/min) |
Permissible cavitation supply
m |
Power of el. Drive
kWt |
Assembly mass
kg |
Agregat mass
kg |
||
Density, t/m3 | Density, t/m3 | ||||||||
to1,3 | to 1,85 | to1,3 | to 1,85 | ||||||
АХP(О)50-32-200-0,8 | 12,5 | 50 | 48 (2900) | 3 | 15 | 18,5 | 155 | 290 | 310 |
АХP(О)50-32-200а-0,8 | 12 | 41 | 11 | 15 | 155 | 245 | 290 | ||
АХP(О)50-32-200б-0,8 | 11,5 | 32 | 7,5 | 11 | 155 | 215 | 245 | ||
АХP(О)50-32-200-1,3 | 12,5 | 50 | 15 | 18,5 | 190 | 320 | 340 | ||
АХP(О)50-32-200а-1,3 | 12 | 41 | 11 | 15 | 190 | 270 | 320 | ||
АХP(О)50-32-200b-1,3 | 11,5 | 32 | 7,5 | 11 | 190 | 240 | 270 | ||
АХP(О)50-32-200-2 | 12,5 | 50 | 15 | 18,5 | 220 | 345 | 365 | ||
АХP(О)50-32-200а-2 | 12 | 41 | 11 | 15 | 220 | 300 | 345 | ||
АХP(О)50-32-200b-2 | 11,5 | 32 | 7,5 | 11 | 220 | 270 | 300 | ||
АХP(О)50-32-200-2,5 | 12,5 | 50 | 15 | 18,5 | 240 | 375 | 395 | ||
АХP(О)50-32-200а-2,5 | 12 | 41 | 11 | 15 | 240 | 330 | 375 | ||
АХP(О)50-32-200b-2,5 | 11,5 | 32 | 7,5 | 11 | 240 | 300 | 330 | ||
АХP(О)65-50-160-0,8 | 25 | 32 | 3,5 | 11 | 18,5 | 160 | 250 | 315 | |
АХP(О)65-50-160а-0,8 | 24,5 | 26 | 11 | 15 | 160 | 250 | 295 | ||
АХP(О)65-50-160b-0,8 | 23,5 | 20 | 7,5 | 11 | 160 | 220 | 250 | ||
АХP(О)65-50-160-1,3 | 25 | 32 | 11 | 18,5 | 200 | 280 | 340 | ||
АХP(О)65-50-160а-1,3 | 24,5 | 26 | 11 | 15 | 200 | 280 | 320 | ||
АХP(О)65-50-160b-1,3 | 23,5 | 20 | 7,5 | 11 | 200 | 250 | 280 | ||
АХP(О)65-50-160-2 | 25 | 32 | 11 | 18,5 | 225 | 305 | 370 | ||
АХP(О)65-50-160а-2 | 24,5 | 26 | 11 | 15 | 225 | 305 | 350 | ||
АХP(О)65-50-160b-2 | 23,5 | 20 | 7,5 | 11 | 225 | 275 | 305 | ||
АХP(О)65-50-160-2,5 | 25 | 32 | 11 | 18,5 | 245 | 335 | 400 | ||
АХP(О)65-50-160а-2,5 | 24,5 | 26 | 11 | 15 | 245 | 335 | 380 | ||
АХP(О)65-50-160b-2,5 | 23,5 | 20 | 7,5 | 11 | 245 | 305 | 335 | ||
АХP(О)80-65-160-0,8 | 25 | 32 | 5 | 15 | 18,5 | 165 | 300 | 320 | |
АХP(О)80-65-160а-0,8 | 24,5 | 26 | 11 | 15 | 165 | 265 | 300 | ||
АХP(О)80-65-160b-0,8 | 23,5 | 20 | 11 | 11 | 165 | 265 | 265 | ||
АХP(О)80-65-160-1,3 | 25 | 32 | 15 | 18,5 | 195 | 330 | 350 | ||
АХP(О)80-65-160а-1,3 | 24,5 | 26 | 11 | 15 | 195 | 295 | 330 | ||
АХP(О)80-65-160b-1,3 | 23,5 | 20 | 11 | 11 | 195 | 295 | 295 | ||
АХP(О)80-65-160-2 | 25 | 32 | 15 | 18,5 | 220 | 360 | 380 | ||
АХP(О)80-65-160а-2 | 24,5 | 26 | 11 | 15 | 220 | 325 | 360 | ||
АХP(О)80-65-160b-2 | 23,5 | 20 | 11 | 11 | 220 | 325 | 325 | ||
АХP(О)80-65-160-2,5 | 25 | 32 | 15 | 18,5 | 265 | 390 | 410 | ||
АХP(О)80-65-160а-2,5 | 24,5 | 26 | 11 | 15 | 265 | 355 | 390 | ||
АХP(О)80-65-160b-2,5 | 23,5 | 20 | 11 | 11 | 265 | 355 | 355 |
Semi-submersible pumps “AXP”
“АХP” type - submersible, vertical, single-stade pump units are intended for handling chemically active and neutral liquids with density not more than 1850 kg/m3, viscosity up to 30xl0-6m2/s, having hard inclusions up to 1 mm volume concentration of which does not exceed 1,5%.
Temperature of pumped liquid – from 233 up to 393K (-40 up to +120ОC).
Pumps of the "АХP" type can be made "АХPО", which are designed for pumping the same liquids as the "АХP" pumps, but with a temperature from 273 to 523K (from 0 to + 250°C), as well as liquids that crystallize at ambient temperature, for which the suspension and pressure pipe have a heating chamber.Pump shaft box seal is double-faced or double-stuffing.
Flow passage details material:
- chromium-nickel steel 12Х18Н9ТЛ-”К”;
- chromium-nickel-molybdenum steel 12Х18Н12М3ТЛ”Е”;
- chromium-nickel-molybdenous steel 07ХН25МДТЛ-”И”.
Pumps are produced for general-industrial and explosive-fireproof purposes.
Level of immersion may be increased by means of suction pipe.
Temperature of pumped liquid – from 233 up to 393K (-40 up to +120ОC).
Pumps of the "АХP" type can be made "АХPО", which are designed for pumping the same liquids as the "АХP" pumps, but with a temperature from 273 to 523K (from 0 to + 250°C), as well as liquids that crystallize at ambient temperature, for which the suspension and pressure pipe have a heating chamber.Pump shaft box seal is double-faced or double-stuffing.
Flow passage details material:
- chromium-nickel steel 12Х18Н9ТЛ-”К”;
- chromium-nickel-molybdenum steel 12Х18Н12М3ТЛ”Е”;
- chromium-nickel-molybdenous steel 07ХН25МДТЛ-”И”.
Pumps are produced for general-industrial and explosive-fireproof purposes.
Level of immersion may be increased by means of suction pipe.